E001 – High Voltage

The generator is connected to an incorrect voltage.

1. Turn off the power immediately.
2. Disconnect the generator from the power source.
3. Do not power it up again until the problem is resolved and the specified voltage is applied.

General Safety Notice:
All permanent electrical connections and electrical system testing should be performed by a qualified electrician.

Steps to Troubleshoot:

1. ⁠Check Supplied Voltage:
• Ensure that the power outlet or terminal where the power cable is connected supplies the voltage specified by the ozone generator manufacturer.
• Refer to the generator label and requirements specified in the user manual for the correct voltage.
2. Use Testing Equipment:
• Use a voltage tester or multimeter to confirm that the outlet delivers the correct voltage.
• If an incorrect voltage is detected, resolve the issue before reconnecting the generator to the power source.

Important Note:

• Do not operate the generator until the voltage issue is corrected.
• ⁠Ensure compliance with all manufacturer specifications to avoid damage to the equipment and ensure safe operation.